1. Safety nets
  2. Sheets/Covers for industrial sector
  3. Air permeable covers per m²
HUCK
Safety nets > Sheets/Covers for industrial sector > Air permeable covers per m²

Air-permeable PP sheet 550 g/m² - custom made

Size
any size
Finish
normal
Material
high tenacity polypropylene
Shading
50%
Eyelets
inside diameter Ø 16 mm, all around, with chosen spacing (standard every 50 cm)
Article number
785
Unit Price per m²
€ 14.20
Ships in approx.
4-6 days
Shipping
Shipping cost
 meter
 meter
Unit Price
€ 28.40 *
* excl. VAT:
€ 23.87 * inc. small size surcharge of: € 14.20 (100%)

Air-permeable sheet made of polypropylene 550 g/m², with reinforcing tape

 

The tarpaulin consists of an air-permeable polyepropylene ribbon raschel fabric with a shading value of 50% and a basis weight of 550 g/m². An approx. 40 mm wide reinforcing tape is attached to the edge of the tarpaulin to guarantee greater strength.

In addition, eyelets with an inner diameter of Ø 16 mm are used, which serve as attachment points. The standard eyelet distance is 50 cm, but can be adjusted individually to your requirements.

Our HUCK tarpaulins are UV-resistant and have a high resistance to weathering. They are characterized by their versatile areas of application. Use our tarpaulins to secure loads, on the playground, on the construction site or in private areas.

We recommend a tarpaulin overhang of approx. 25 cm for installations such as trailer cover tarpaulins, sandbox cover tarpaulins, etc. In order to be able to exclude a faulty production, we ask you not to indicate the area to be covered, but the actual outer dimension of the tarpaulin.

For each intended use, we will provide you with the best possible tarpaulin through first-class advice.

 

In order to ensure the best possible quality for you, our tarpaulins are assembled in our own production halls in Germany and are checked again by our qualified employees before delivery.

Properties
Article number
785
Available colours
Green (01)
Type
air-permeable
Size
any size
Execution
without shock cord
Finish
normal
Weight per m²
550 g/m²
Material
high tenacity polypropylene
Production Tolerance
external dimensions ± 2.5 cm
Shading
50%
Edge Execution
with reinforced and stitched edges all around (approx. 40 mm wide)
Eyelets
inside diameter Ø 16 mm, all around, with chosen spacing (standard every 50 cm)
Continuous operating temperature
-40 to +80 °C
Melting point
165 °C
Bending strength & abrasion resistance
good
Weather-Resistance
good
Tensile strength after two years of climatic influences
90%
Customs tariff number
6307 90 10
Ships in approx.
4-6 days
Downloads
Data sheet art. 785

DB_785_en_2018-06.pdf