Huck-Dralo® ball stop fencing, extension module

Huck-Dralo® -ball stop fencing, extension module, Width: 5 m, height: 5 m

The Huck-Dralo® ball stop modular fencing system consists of a basic module that comes in a standard 5 m width and 5 m height. As many 5 m x 5 m module extensions as you wish can be added. This article here is the extension module. You can find the basic module here.

The basic module contains two posts, a net (approx. 3 mm dia.), plus a crossbar to finish it at the top, tension cables and assembly accessories. Each expansion module comes with an additional post, the net and all the small parts required.

The anchoring device has been specially developed for the system (above) and ensures a very light section profile with maximum stability. This straight finish is also very important to give the look of a wire rope net.

The net areas (net + crossbeam) can easily be assembled by one person on a mobile elevated platform. The system allows efficient assembly with long-lasting, vandal-proof components.

The differing mesh size design (50 x 100 mm at the bottom, 50 x 200 mm from 2 m up) prevents people from climbing up the fence and also means it weighs less. Under EN 15312 the horizontal mesh size of ball stop fencing should not exceed 50 mm to make climbing it harder.

For this Huck-Dralo material there is also a general approval by the building authorities (Z-14.7-765) in the "fall protection" section.

Equipment:

• 1 post (6.00 m or 6.50 m, depends on how many extension modules you already have)
• 1 Dralo net (5.00 x 5.00 m) incl. crossbar
• tensioning rope
• fastening accessories

To ensure the best possible quality for you, our nets are assembled in our own production halls in Germany and are checked once again by our qualified staff before delivery.