PE-Snow fence with integral polyester posts, size: 50 x 1.10 m, incl. support plates

Snow fence with integrated polyester posts, size: 50 x 1.10 m, incl. support plates

The fence is made of rot-proof polyethylene knitted fabric with integrated flexible, glass fibre reinforced polyester erection rods. The poles are provided with polyamide caps and two eyelets for fixing the guy ropes. The delivery includes 18 ground sockets made of impact-resistant GRP, 18 support plates, 36 steel ground anchors and 18 guy ropes each for the upper and lower bracing. Due to the special mesh opening, an optimal snowdrift takes place and the high weather resistance makes the fences suitable for long-term outdoor use.

Use this fence as a snow guard fence for soft ground. The article 7040 can be used alternatively for hard ground!

Recommendation for assembly:

Attention: To prevent the ground sleeve from sinking into very soft soils, it is inserted through the support plate

Roll out fence, drive in ground sockets. Before hammering in, tighten each field individually. Put caps with tensioning cords on the poles. If possible, drive in ground anchors and ground sockets in full length and set to full tension or to tension. Do not forget the lower bracing.

In order to minimize the wind's impact and to allow game passes, the 50m fences should be set up offset to each other.

In order to ensure the best possible quality for you, our snow fences are manufactured in our own production halls in Germany and are checked again by our qualified employees before delivery.