1. Industrial
  2. Cover nets & sheets
  3. Sheets
HUCK
Industrial > Cover nets & sheets > Sheets

PE-cover sheet 200 g/m², 3,50 x 5 m

Size
3,50 x 5 m
Material
polyethylene fabric
Mesh size
1 x 3 mm
Shading
50%
Eyelets
inside diameter Ø 16 mm, all around, with chosen spacing (standard every 50 cm)
Article number
7201
Unit Price
€ 79.14
Ships in approx.
6-8 days
Shipping
Shipping cost
Unit Price
€ 79.14 *
* excl. VAT:
€ 66.50

Load securing tarpaulin made of polyethylene 200 g/m², with reinforcing tape 

 

The tarpaulin consists of an air- and water-permeable PE-tape fabric with a shading value of 50% and a basis weight of 200 g/m². An approx. 40 mm wide reinforcing tape is attached to the edge of the tarpaulin to guarantee a higher strength.

In addition, eyelets with an inner diameter of Ø 16 mm are used, which serve as attachment points. The standard eyelet distance is 50 cm, but can be adjusted individually to your requirements.

Our HUCK tarpaulins are UV-resistant and have a high weather resistance. They are characterized by their versatile fields of application. Use our tarpaulins to secure loads, on the playground, on the construction site or in private areas.

We recommend a tarpaulin overhang of approx. 25 cm for installations such as trailer cover tarpaulins, sandbox cover tarpaulins, etc. In order to be able to exclude a faulty production, we ask you not to indicate the area to be covered, but the actual outer dimension of the tarpaulin.

For each intended use, we will provide you with the best possible tarpaulin through first-class advice.

 

In order to ensure the best possible quality for you, our tarpaulins are ready-made in our own production halls in Germany and are checked again by our qualified employees before delivery.

Properties
Article number
7201
Available colours
Dark Green (015)
Type
air-permeable
Size
3,50 x 5 m
Execution
without shock cord
Weight per m²
200 g/m²
Material
polyethylene fabric
Mesh size
1 x 3 mm
Shading
50%
Eyelets
inside diameter Ø 16 mm, all around, with chosen spacing (standard every 50 cm)
Breaking strength
60 daN (according to DIN 53 857/1, average lengthways)
Standards and Rules
VDI standard 2700
Continuous operating temperature
-30 to +60 °C
Melting point
155 °C
Bending strength & abrasion resistance
good
Weather-Resistance
good
UV-Resistance
250 kly
Tensile strength after two years of climatic influences
90%
Customs tariff number
6307 90 10
Total Weight
4.10 kg
Ships in approx.
6-8 days