Discus Throwing Safety Net 6.50 high x 27 m long, diagonal meshes
|Available colours:||Green (01)|
|Material:||high tenacity polypropylene, knotless|
|Size:||6,5 m high x 27 m long (net is made for a 9-panel-cage: 2 x 2m ; 2 x 3.7 m ; 5 x 3m)|
|Mesh design:||diagonal meshes|
|Mesh size:||45 mm|
|Continuous operating temperature:||-40 to +80°C|
|Melting point:||165° C|
|Bending strength & abrasion resistance:||good|
|Tensile strength after two years of climatic influences:||90 %|
|Customs tariff number:||95069990|
Discus Throwing Safety Nets DIN 79007-3, 6.50 high x 27 m long, diagonal meshes
The Standards Committee NA 112-01-01 AA "Athletic Equipment", that Manfred Huck GmbH is an active member of, was responsible for drawing up the Standard DIN 79007-3, which sets out the requirements and test methods for hammer and discus throwing safety net equipment.
The surrounding discus safety net must reach at least 6 m from the ground. Safety nets meeting the standard EN 1263-1 Type B1, with a highest mesh size of 45 mm +-1 mm must also be used.
This net is made for a 9-panel-cage: 2 x 2m ; 2 x 3.7 m ; 5 x 3m.
Our discus throwing safety nets are made in knotless form from polypropylene with a diameter of approx. 5 mm.
Our HUCK nets are characterised by their versatility and quality. They are 100% non-toxic and, thanks to special impregnation, can be used both indoors and outdoors.
To ensure the best possible quality for you, our nets are manufactured in our own production halls in Germany and checked again by our qualified employees before delivery.